N45-89kW
Cylinder Arrangement: 4L
Air Feeding: TCA
Displacement [liters]: 4.5
Injection System: ECR
Exhaust system: Hi-eSCR2
2200 rpm [kW]: 89
Emission: Stage V
NEF series boosts productivity.
More than 1.7 million engines sold attest to FPT Industrial’s leadership since 2001. NEF boasts best-in-class power and torque performance, fuel efficiency and reliability. It is highly flexible, with 4 and 6 cylinder configurations, featuring non-structural design. The new Stage V NEF series marks an additional leap in efficiency. With no change in engine size and layout, innovative designs in cylinder head, pistons and turbochargers raise the performance further, leaving the competition behind.
OPTIMIZED COMBUSTION FOR EFFICIENT PERFORMANCE OUTPUT
MAINTENANCE FREE ATS SOLUTION
COMPACT INSTALLATION
UP TO 600 HOURS OIL SERVICE INTERVALS
Cylinder Arrangement: 4L
Air Feeding: TCA
Displacement [liters]: 4.5
Injection System: ECR
Exhaust system: Hi-eSCR2
2200 rpm [kW]: 89
Emission: Stage V
Cylinder Arrangement: 4L
Air Feeding: TCA
Displacement [liters]: 4.5
Injection System: ECR
Exhaust system: Hi-eSCR2
2200 rpm [kW]: 103
Emission: Stage V
Cylinder Arrangement: 4L
Air Feeding: TCA
Displacement [liters]: 4.5
Injection System: ECR
Exhaust system: Hi-eSCR2
2200 rpm [kW]: 125
Emission: Stage V
Cylinder Arrangement: 4L
Air Feeding: TCA
Displacement [liters]: 4.5
Injection System: ECR
Exhaust system: Hi-eSCR2
2100 rpm [kW]: 150
Emission: Stage V
Cylinder Arrangement: 4L
Air Feeding: TC I-EGR
Displacement [liters]: 3.2
Injection System: M
2500 rpm [kW]: 55
Emission: Stage lllA
Cylinder Arrangement: 4L
Air Feeding: TC I-EGR
Displacement [liters]: 3.2
Injection System: M
2500 rpm [kW]: 61
Emission: Stage lllA
Cylinder Arrangement: 4L
Air Feeding: TCA I-EGR
Displacement [liters]: 3.2
Injection System: M
2500 rpm [kW]: 65
Emission: Stage lllA
Cylinder Arrangement: 4L
Air Feeding: TCA I-EGR
Displacement [liters]: 4.5
Injection System: ECR
2200 rpm [kW]: 104
Emission: Stage IIIA
L (in line)
V (90° "V" configuration)
TCA (Turbocharged with aftercooler)
TC (Turbocharged)
NA (Naturally Aspirated)
M (Mechanical)
ECR (Electronic Common Rail)
EUI (Electronic Unit Injector)
MPI (Multi Point Injection)
EGR (Exhaust Gas Recirculation)
SCR (Selective Catalytic Reduction)
Best in class power and torque density : up to +15% vs. competitors average in 6 L engine range.
New high capacity filters with clogging sensor. Maintenance-free ATS. No parked regeneration. New piston rings design & advanced machining process.
Lean design with no EGR and single stage turbocharging solution.
No changes in cooling package required.
Performance increase with same engine displacement and no layout changes. Maximized power, torque and transient response.
Best in class service interval up to 1200 hours. Low running costs over lifecycle. No need to stop equipment during operation. Reduced oil consumption.
Ensuring robustness and durability. Proven system reliability.
Unique solution across emission stages (StageIIIA to StageV).
Stage V To maintain the advantages of the unique and unbeaten HI-eSCR technology, FPT Industrial will integrate a maintenance-free filtering device on its SCR catalyst, thus allowing to comply with tightened limits on PM emissions within a compact package. The second generation HI-eSCR 2, applicable for engines above 56kW and below 560kW, where different emission limits apply, will maintain the same after-treatment dimension of the current Tier4 Final / Stage IV applications, requiring no machine redesign nor layout changes for easier upgrade to next emission level. Thanks to optimized combustion, leadership on performance and fuel efficiency is confirmed, while maintenance free aftertreatment and no need for parked regeneration ensure low running costs avoiding unplanned downtime.
Advantages
• High performance for increased vehicle productivity.
• No additional complexity and lean design for easier installation and maximum reliability.
• Low operating costs thanks to high efficiency and long service intervals.
By way of continuous technical advantages our state of the art engine range allows our customers to have class leading features, such as minimized total cost of ownership and outstanding performance. Key to the optimization of engine efficiency is EGR-free combustion on NEF and Cursor engine families, together with high cylinder pressure and high injection pressures: engines adopting the latest generation of Common Rail system feature peak nozzle pressures of up to 2200 bar. To achieve these targets, crankcase and cylinder head design has been improved to ensure increased structural stiffness. An Electronic Control Unit manages engine parameters and guarantees an accurate control of the after treatment system. Extended service interval, together with a maintenance-free after-treatment solution reduce running cost for end users.
• High Productivity
• Reduced operating costs
• “For life” after-treatment systems
• Enhanced reliability
• Maximised uptime
High Performance
Best in class power and torque density. Machine uptime: no need to stop equipment for parked regeneration.
Low Operating Costs
Best in class fluid consumption. Maintenance-free after-treatment system: no replacement costs over lifecycle.
Ease of Use
Extended service intervals, no need to stop equipment during operation for parked regeneration.
Technological excellence and product innovation are at the core of FPT Industrial’s mission. FPT industrial has focused its R&D activities in order to become the innovation leader in the industrial powertrain field and a go-to provider of the most advanced solutions with a low environmental footprint. Compliance with emission standards comes with minimal impact on vehicle architecture. HI-eSCR is a breakthrough technology bringing vast performance and efficiency benefits. This FPT patent makes the most of a 25-year, 1-millionunit experience. To comply with future Stage V standards, the second generation HI-eSCR2 builds competitive advantages, including best-in-class performance and low running costs.
During the combustion process, the chemical energy of the fuel is converted into mechanical energy. Because of the chemistry of combustion, several pollutants are produced, of which the most harmful are Nitrogen Oxides (NOx) and Particulate Matter (PM). Since 2011, when Tier4 Interim/Stage IIIB came into force, many efforts have been made to reduce such pollutants damaging the environment. Tier4 Final/Stage IV regulation, introduced in 2014, implied a further significant reduction of NOx (-80% Vs. Tier4 Interim/Stage IIIB levels) while PM was not affected by further reductions. Stage V, a new regulatory step, will be introduced in Europe starting from 2019/2020 depending on engine power level, further tightening the limits on PM emissions: admitted PM quantity will be reduced by 40% compared to Stage IV and a new limit will be introduced on the number of emitted particles (Particle Number Limit, PN). In addition, Stage V regulation will involve power ranges currently with lighter or no legislation at all in Europe (power ranges below 37kW or above 560kW).
PM Particulate Matter
HC Unburnt Hydrocarbons
NOx Nitrogen Oxides
CO Carbon Monoxide
N2 Nitrogen
CO2 Carbon Dioxide
H2O Water
The whole system is fitted with a network of integrated sensors to control temperature, pressure and NOx levels. Exhaust gas flow coming from the engine enters the DOC, where NO is oxidised to NO2, in order to maximize SCR catalyst’s efficiency conversion. The ECU (Engine Control Unit), the brain behind the HI-eSCR 2 system, checks, through integrated sensors network, the amount of Water-Urea (DEF/AdBlue) solution to be injected in the exhaust pipe. To increase the durability of the injector, Dosing Module is cooled by the engine coolant. The HI-eSCR 2 after-treatment system adopts a fiLering device on its SCR catalyst. At the same time as trapping and oxidizing the Particulate Matter, the catalyst converts NOx into Nitrogen (N2) and water (H2O) thanks to the chemical reaction of Ammonia (NH3) generated from DEF/Adblue. In the end, the integrated CUC eliminates the remaining Ammonia (NH3). The result is a reduction of NOx superior to 95% and the PM levels within Stage V emission limits.
Patents
• Closed loop control with proprietary algorithms and dedicated sensors to provide accurate monitoring of exhaust gas composition and optimized DEF/AdBlue dosing strategy.
• Thermally insulated high turbulence mixer to allow homogeneous DEF/ AdBlue evaporation and urea hydrolysis ensuring correct distribution in exhaust gas flow.
• Optimized exhaust gas thermal management to ensure emission compliance in all working conditions.
• All after-treatment components are packaged in a compact and fully enclosed structure, providing flexible layout options to simplify installation on machines.
Developed to satisfy the most demanding productivity requirements of construction and industrial missions, the NEF Series marks FPT Industrial technological excellence since 2001, strong of more than 1.7 million engines produced. Featuring best-in-class power and torque performance, fuel efficiency and reliability, the NEF Series stands out for its flexibility, available in 4 (N45) and 6 (N67) cylinders configurations, with non-structural and structural design.
In its continuous commitment to provide leading products and improved solutions, FPT Industrial introduces the new Stage V NEF Series setting a further step towards higher productivity. Maintaining the same engine dimensions and layout of previous versions, cylinder head, pistons and turbochargers have been redesigned for performance increase: up to 150 kW on N45 (+15%) and up to 260 kW on N67 (+13%) to deliver best in class power and torque density (up to +15% Vs. competitors average).New filters with increased capacity and clogging sensor are capable of up to 1200 hours service interval, the longest in the market and twice the previous interval. This new feature comes along with the innovative HI-eSCR2 after-treatment system, which comply with Stage V regulations with a maintenance-free, contributing to low operating costs and avoiding any downtime during machine operation for unnecessary stops for parked regeneration.
Proven and further enhanced EGR free combustion guarantees the fuel efficiency of NEF Series, together with additional improvements in fluid consumption, leveraging on reduced frictions for leading efficiency compared to competitors using EGR and DPF.
Lean design with no EGR and single stage turbocharging, available both as fixed or variable geometry, is a made-to-last solution ensuring maximum reliability. Thanks to the dimension-neutral approach granted by HI-eSCR2, Stage V solution features unchanged packaging and same cooling requirement compared to Stage IV.